Portable command communication cabinet
The portable mobile video command system integrates all the functions required by the on-board machine in the entire mobile video transmission system, and at the same time reserves the corresponding installation location for the expansion of the function, and is flexibly used in the mobile video on-board system. The all-in-one machine has a built-in receiver with two-way voice, a transmitter with GPS function, and corresponding AV matrix, local hard disk recording and 3G video transmission system; the audio and video signals of each channel can be observed through the integrated industrial 19-inch 1U display. Flexible and convenient to use. The built-in 1000W inverter can directly draw power from the car to cope with the actual use on site.
○ 3G equipment, hard disk recording, AV matrix are integrated together to reduce the connection between the equipment, greatly improving the stability of the system, you can switch the signal source to the designated equipment at will.
○ The display uses a pull-out display, which reduces space and enhances shock resistance.
○ The image transmission adopts equipment that can be forwarded within 8M, which reduces the interference between wireless devices, especially the interference to the wireless cluster;
○ Separate control of the total power supply and each device increases the safety of the system.
○ The control keyboard adopts wireless remote control
○ Cabinet components (including: cabinet / built-in push-pull monitor / three-core power cable / inverter power cable / video cable / keyboard power cable / DC12V output, 485 control cable);
○ Image transmission system (including: host / manual / three-core power cord / BNC head to lotus seat / GPS antenna / three-core AV cable / CD-ROM);
○ Image receiving system (including: host / manual / three-core power cable / HDMI high-definition cable / three-core AV / CD);
○ 3G matrix DVR integrated machine (including: host / manual / three-core power cord / CD-ROM).
○ Installation diagram